Key Takeaways

  • Pace per mile is 60 divided by mph. 6.0 mph is 10:00 per mile, and 7.5 mph is 8:00.
  • A 1% incline made treadmill running cost the same as level outdoor running at 6.5 to 11.2 mph in nine trained men[1]. We use that as the air-resistance offset.
  • For other inclines, we scale by the energy cost of grade. Minetti's measured curve[2] is the default, and the ACSM running equation[3] is shown beside it. At 5% incline they differ by about 5% of belt speed, so treat the result as a range.

How the Conversion Works

Speed to pace. Pace per mile is 3,600 divided by mph in seconds. Pace per km is 3,600 divided by km/h. One mile is 1.609344 km.

Equal effort at another incline. Running cost per meter does not change with speed at a given grade in either model, so equal effort at the same speed means equal cost per meter.

We set level outdoor running equal to a 1% belt grade (air resistance on), or to 0% (grade only). A belt at grade g then matches level outdoor running at the belt speed times C(g) ÷ C(offset), where C is the cost per meter.

At the offset grade the factor is exactly 1.

Example, belt at 7.5 mph (8:00 per mile)

At 1%, level outdoor pace is 8:00 per mile. At 0%, it is about 8:27 (Minetti) or 8:22 (ACSM) because the belt gives no air resistance. At 5%, it is about 6:29 (Minetti) or 6:49 (ACSM) because the hill adds work.

Example, outdoor 8:00 per mile

To match it at 1%, set 7.5 mph. At 0%, set about 7.92 mph (7:35). At 3%, set about 6.74 mph (8:54). At 5%, set about 6.08 mph (9:52). ACSM gives 6.91 mph at 3% and 6.40 mph at 5%.

Goal time

Distance divided by goal time gives the belt speed. Incline does not change it. The tool then shows the level outdoor pace that is the same effort.

Nearest setting

The tool assumes your console steps in 0.1 mph or 0.1 km/h, which varies by machine. It rounds to that step and shows how many seconds per mile the rounding costs you.

Energy (optional)

With distance and weight, energy above resting is cost per meter × weight × distance. Minetti's cost is in joules per kg per meter, net of resting, and we divide by 4,184 for kcal[2].

ACSM gives (0.2 + 0.9 × grade) ml of oxygen per kg per meter, at about 5 kcal per liter[3][4]. Bushman applies that 5 kcal to gross oxygen use. We leave out the resting 3.5 ml/kg/min so both figures count only the cost of running.

Elevation gain is treadmill distance times incline. 3 miles at 5% is about 241 m (792 ft).

Grade Cost: Minetti vs ACSM

Minetti and colleagues measured running cost on a treadmill in 10 elite male mountain racers (mean body mass 61 kg), in 4-minute trials at level and at slopes from 10% up to 45%[2]. They fitted a fifth-order polynomial for −45% to +45%.

The measured level cost was 3.40 J/kg/m; the fit gives 3.6. The ACSM running equation instead adds a straight-line grade term[3]. The table shows each model's cost per meter as a multiple of the same model's 0% cost.

GradeMinetti (× level)ACSM (× level)Minetti ÷ 1%ACSM ÷ 1%
1%1.0551.0451.0001.000
3%1.1741.1351.1121.086
5%1.3011.2251.2331.172
8%1.5091.3601.4301.301
10%1.6581.4501.5711.388
12%1.8141.5401.7181.474
15%2.0601.6751.9521.603

Minetti rises faster on climbs, so it asks for a slower belt at a given incline. We use it as the default because grade cost was measured directly.

Its sample is small and elite, and it has no measurements between 0 and 10%, where most treadmill running happens, so those values come from the fitted curve. ACSM is a population equation. Neither is exact for you.

The 1% Incline Rule: What the Study Found

Running on a treadmill has no headwind, so it costs less than the same speed outdoors.

Jones and Doust had nine trained men run 6 minutes at six speeds from 2.92 to 5.0 m/s (6.5 to 11.2 mph, 9:11 to 5:22 per mile) on a treadmill at 0, 1, 2, and 3% and once on a level road[1].

  • At the two slowest speeds (2.92 and 3.33 m/s, 6.5 and 7.4 mph), road running matched 0% or 1%.
  • At 3.75 m/s (8.4 mph), road running matched only 1%.
  • At 4.17 and 4.58 m/s (9.3 and 10.2 mph), it matched 1% or 2%, and was higher than 0%.
  • At 5.0 m/s, the road value fell between 1% and 2% and did not differ significantly from any grade.

The authors concluded 1% reflects the cost of outdoor running at those speeds for runs of about 5 minutes. The sample was nine trained men, and the study does not cover women, slower joggers, or longer runs.

We hold the offset at 1% across the tested range. Outside it, the calculator warns you.

Outdoor Pace to Treadmill Speed Chart

Belt speed in mph that matches a level outdoor pace, with the 1% air-resistance offset and the Minetti curve. A dash means the belt would be slower than 3 mph.

Outdoor pace /mi0%1%2%3%5%8%10%12%
6:0010.610.09.59.08.17.06.45.8
6:309.79.28.88.37.56.55.95.4
7:009.08.68.17.77.06.05.55.0
7:308.48.07.67.26.55.65.14.7
8:007.97.57.16.76.15.24.84.4
8:307.57.16.76.35.74.94.54.1
9:007.06.76.36.05.44.74.23.9
9:306.76.36.05.75.14.44.03.7
10:006.36.05.75.44.94.23.83.5
11:005.85.55.24.94.43.83.53.2
12:005.35.04.74.54.13.53.2-

Speed and Pace Quick Reference

mphkm/hPer milePer km
4.06.415:009:19
4.57.213:208:17
5.08.112:007:27
5.58.910:556:47
6.09.710:006:13
6.510.59:145:44
7.011.38:345:20
7.512.18:004:58
8.012.97:304:40
8.513.77:044:23
9.014.56:404:09
9.515.36:193:55
10.016.16:003:44
10.516.95:433:33
11.017.75:273:23
11.518.55:133:15
12.019.35:003:06

For race splits, see the Running Split Calculator. For race-day targets, use the Marathon Pace Calculator. For a calorie estimate by speed and terrain, try the Jogging Calorie Calculator.

Limitations

  • The 1% result covers 6.5 to 11.2 mph and runs of about 5 minutes. Outside that, the offset is an extrapolation[1].
  • Combining a grade-cost model with the 1% offset is a step this tool adds. No study tests it at inclines other than 1%.
  • Minetti's curve comes from 10 elite male mountain racers, with no measurements between 0 and 10%. The paper gives standard deviations for its measured means (3.40 ± 0.24 J/kg/m on the level) but no interval for the fitted curve[2]. The ACSM equation assumes steady state and is meant for running above 5 mph, or 3 mph if you are jogging[3][5]. It is not a walking model.
  • Displayed belt speed is not always true speed. In one study of four treadmills, average belt speed during running ranged from about 98 to 103% of the target[6]. The tool cannot correct for your machine.
  • Wind, heat, surface, and running economy change real effort. This is a training reference, not medical advice.

Frequently Asked Questions

Sources & References

  1. A 1% treadmill grade most accurately reflects the energetic cost of outdoor running. Jones AM, Doust JH. J Sports Sci 14(4):321-327 (1996)
  2. Energy cost of walking and running at extreme uphill and downhill slopes. Minetti AE, Moia C, Roi GS, Susta D, Ferretti G. J Appl Physiol 93(3):1039-1046 (2002)
  3. Metabolic Calculations in Action: Part 1. Bushman BA. ACSM's Health & Fitness Journal 24(3):6-10 (2020)
  4. Metabolic Calculations in Action: Part 2. Bushman BA. ACSM's Health & Fitness Journal 24(4):5-8 (2020)
  5. Compendium of Physical Activities: Unit conversions (ACSM metabolic equations and their speed ranges). Compendium of Physical Activities. Website
  6. A new method for measuring treadmill belt velocity fluctuations: effects of treadmill type, body mass and locomotion speed. Willwacher S, Oberländer K, Mai P, et al.. Sci Rep 11:2244 (2021)
Manish Kumar
Manish Kumar

Certified Personal Trainer & Sports Nutritionist

NASM-CPTCertified Sports Nutritionist10+ Years Experience500+ Clients Coached

NASM-certified fitness and nutrition coach with over 10 years of hands-on experience helping people build strength, lose fat, and live healthier lives. Specializing in gym-based workouts with a strong focus on lifting technique, biomechanics, and practical exercise science. Through FitLifeRegime, sharing the tools, tips, and insights that have worked for hundreds of clients — helping you start your own fitness journey with confidence and clarity.

Learn more about Manish
NASM Certified Personal Trainer Certificate

NASM Certified

Certified Personal Trainer & Sports Nutritionist from the National Academy of Sports Medicine

Disclaimer: This tool is for informational and personal journaling purposes only. Results are estimates based on published formulas and may vary based on individual factors such as genetics, training history, and measurement technique.