Key Takeaways

  • The Army no longer measures body fat. Under Army Directive 2026-13 (1 July 2026) the only authorized standard is waist-to-height ratio. Your waist at the navel divided by your height must be below 0.55, and exactly 0.550 does not meet it[1][3].
  • The record is built from rounded measurements. Each waist reading is rounded down to the nearest half inch, height is rounded to the nearest half inch, and the ratio is cut off at three decimals, not rounded[2].
  • The height and weight tables, the tape test and supplemental body fat assessments are no longer authorized, and no AFT score exempts anyone[1][3][4].
  • 0.55 is an Army policy line, not a health benchmark. NICE advises keeping your waist under half your height (a ratio under 0.5)[8].
  • The Army plans a 180-day assessment of WHtR that could lead to adjustments[3]. Treat this page as the policy published in July 2026.

What Changed in 2026

Until July 2026 the Army screened Soldiers against height and weight tables and sent anyone over the table to a tape test for a body fat percentage. Army Directive 2026-13 ended that. The Army announced the change on 7 July 2026, and the directive is dated 1 July 2026[1][3].

DatePolicy
16 July 2019AR 600-9 prescribes the multi-site circumference tape method[6]. Height and weight screening tables decided who went to a tape test[7].
9 June 2023Army Directive 2023-11 introduces a one-site (abdomen) tape test, phased in over 12 months. After that it is the only authorized tape method[6][7].
1 July 2026Army Directive 2026-13 makes WHtR the sole standard and discontinues the height and weight screening tables. It rescinds AD 2025-17 and DA Form 5501[1]. The Army's own program page says the tape test and all earlier body fat methods have been rescinded[4].

That is why this calculator opens on waist-to-height ratio. The old tape test is still here as a second mode, clearly labelled, because many people still search for it. It will not give you an Army result.

How the WHtR Standard Works

The ratio is simple: average waist in inches divided by height in inches[2]. The standard is a ratio of less than 0.55. In plain terms, your waist has to stay under 55% of your height[1].

  • Three waist readings, each rounded down to the nearest 0.5 inch, then averaged[2].
  • Height rounded to the nearest 0.5 inch[5].
  • The ratio is recorded to three decimals and not rounded. Any later digits are dropped, so 0.549888 is recorded as 0.549 and meets the standard[2].
  • Soldiers are measured at least twice a year. A commander can direct a measurement at any time[1].
  • Leave at least 7 days between an AFT or CFT and the WHtR measurement. Commanders can deviate for urgent operational needs[1].
  • A result of 0.55 or higher gets a confirmation measurement by a different team on the same duty day, before any action. If confirmed, the Soldier is flagged and enrolled in the Army Body Composition Program[1]. The Army says no separation actions for failing WHtR will happen during its initial 180-day assessment period[3].

Worked example: 70 inches tall

Readings of 38, 38.5 and 38 inches average 38.167 inches. Divided by 70 that gives 0.5452, recorded as 0.545. It meets the standard. Three readings of 38.5 average 38.5 inches, which is exactly 38.5 / 70 = 0.55, recorded as 0.550. It does not meet the standard.

How the Army Measures

The implementing guidance for the ABCP spells out the procedure[5]. The points that matter most:

  • Where: the waist is measured at the navel, with the tape parallel to the floor, starting on the Soldier's right side. The tape touches the skin and does not compress it.
  • How many times: three readings. If one reading is more than 1 inch from the other two, take a fourth and average the three closest, rounded to the nearest half inch. The calculator asks for the fourth reading when that happens.
  • Who: an NCO or higher, or a trained DA civilian. Two people work together, one placing the tape and one checking tension and recording. Soldiers are measured by a trained person of the same sex where possible.
  • What you wear: socks, standard Army physical fitness trunks and a T-shirt. Undergarments that bind the abdomen are not allowed. The shirt can be lifted and secured at the collar so it does not interfere with the tape.
  • Height: measured in socks, standing straight with the head level, then rounded to the nearest half inch.
  • Tape: non-stretch, preferably fiberglass, a quarter to half an inch wide and at least 5 feet long. Cloth and steel tapes are not accepted.
  • Hard-to-find navel: if a skin fold hides it, mark the spot with a small "x" and measure the outermost circumference across it. If there is no navel, measure 2 inches above the hip bone (anterior superior iliac spine).

The Army uses two people for a reason: one places the tape, the other checks the tension and records. If you practise at home, get a helper to do the same job.

Maximum Waist by Height

The guidance includes a screening table of the largest waist that still meets the standard at each height[5]. This table is built the same way from the 0.55 rule, in half-inch steps.

It is a shortcut for the largest passing waist, not a different standard. Your three-reading average can fall between half inches and the calculator uses it as is.

Height (in)Waist must be under (in)Largest passing waist (in)Ratio at that waist
5831.9031.50.543
6033.0032.50.541
6234.1034.00.548
6435.2035.00.546
6636.3036.00.545
6837.4037.00.544
7038.5038.00.542
7239.6039.50.548
7440.7040.50.547
7641.8041.50.546
7842.9042.50.544
8044.0043.50.543

The official table runs from 48 to 83.5 inches in half-inch steps. Every value shown here matches it[5]. Use the calculator for the exact figure at your height.

The Retired Tape Test

The one-site test used your weight and a single abdomen measurement at the navel to estimate body fat. The Army began using it in 2023.

After a 12-month phase-in it was the only authorized tape method, until July 2026[6][7]. These are the equations it used[7]:

  • Men: body fat % = −26.97 − (0.12 × weight in lb) + (1.99 × abdomen in inches)
  • Women: body fat % = −9.15 − (0.015 × weight in lb) + (1.27 × abdomen in inches)

The rounding rules matter, because the old pass or fail depended on them. Each reading was rounded down to the nearest half inch, the average to the nearest half inch, weight to the nearest pound, and the final body fat to the nearest whole percent[7].

The guidance's own examples are 26.475% recorded as 26% for a woman with a 30 inch abdomen at 165 lb, and 17.48% recorded as 17% for a man with a 35 inch abdomen at 210 lb. The calculator reproduces both.

Former maximum body fat by age[7]

AgeMenWomen
17 to 2020%30%
21 to 2722%32%
28 to 3924%34%
40 and older26%36%

Under the old rules a Soldier who failed the tape test could ask for a supplemental assessment such as DXA, InBody 770 or Bod Pod, if the testing was reasonably available[6][7].

The current directive says no tape test or other body fat assessment can be used to challenge a WHtR result[1]. If you want a skinfold estimate for your own training, see the Jackson-Pollock 4-Site Calculator.

What 0.55 Means for Health

Waist-to-height ratio is used in health care as well as in the Army. NICE guidance for adults with a BMI under 35 classifies it like this[8]:

RatioNICE categoryArmy
0.4 to 0.49Healthy central adiposity, no increased riskMeets standard
0.5 to 0.549Increased central adiposity, increased riskMeets standard
0.55 to 0.59Increased central adiposity, increased riskDoes not meet standard
0.6 or moreHigh central adiposity, further increased riskDoes not meet standard

NICE also tells people to try to keep their waist under half their height, a ratio under 0.5[8]. So the Army line sits inside NICE's increased-risk band. Meeting the Army standard does not mean a ratio of 0.54 is low risk.

The research behind using WHtR as a screening measure is solid. A 2012 systematic review and meta-analysis of 31 studies and more than 300,000 adults found WHtR discriminated cardiometabolic risk factors better than BMI, and better than waist circumference alone for diabetes, hypertension and cardiovascular outcomes[9].

The authors call it a screening tool. It does not diagnose anything.

The directive says the change aligns the Army with medically validated health standards[1]. No published validation study backs the 0.55 number itself.

Limitations

  • This is a practice check. Official results come from trained personnel, are recorded on DA Form 5500 and can be confirmed by a second team[1][2].
  • The policy shown is the one published in July 2026. The Army's 180-day assessment could change the standard[3]. Check the current directive or ask your unit.
  • For the three-reading average the calculator follows DA Form 5500, which says to average to three decimal places[2]. The measurement guidance only mentions rounding the average to the nearest half inch when a fourth reading is needed[5]. If your unit applies a different rounding, a borderline result can differ.
  • The detailed measurement procedure comes from an annex to the Army's implementing guidance. The only available copy is hosted outside official Army sites, so its exact designation cannot be confirmed[5]. The ratio rules, the 0.55 standard and the rounding come from the directive and the DA Form 5500[1][2].
  • The tape test mode only estimates body fat, as the old test did. It was never a lab measurement. It follows the rules in force until July 2026[7].
  • NICE's ratio bands are for adults with a BMI under 35[8]. If you cannot measure your waist reliably, ask a health professional.
  • For your own fitness readiness, see the AFT Calculator, and for a general-population WHtR with risk categories, the Waist-to-Height Ratio Calculator.

Frequently Asked Questions

Sources & References

  1. Army Directive 2026-13 (Army Body Composition Program and Standards). Secretary of the Army. Army Publishing Directorate, dated 1 July 2026 (2026)
  2. DA Form 5500: Army Body Composition Screening and Assessment Worksheet. U.S. Army, G-1. Army Publishing Directorate, July 2026 edition (change 101, 1 September 2026) (2026)
  3. Army modifies body composition program, adopts waist-to-height ratio. Army Public Affairs. army.mil, July 7, 2026 (2026)
  4. Army Body Composition Program. U.S. Army Directorate of Prevention, Resilience and Readiness. armyresilience.army.mil
  5. Annex A: Implementing Guidance for Waist to Height Ratio Measurement Procedures for the ABCP. Department of the Army. Copy hosted by a third party; its date and designation are unconfirmed
  6. Army Directive 2023-11 (Army Body Fat Assessment for the Army Body Composition Program). Secretary of the Army. armyresilience.army.mil, dated 9 June 2023 (superseded) (2023)
  7. ALARACT 046/2023 (implementing guidance for Army Directive 2023-11, Appendix B). Department of the Army. Message dated 12 June 2023; copy hosted by a third party (superseded) (2023)
  8. Overweight and obesity management (NG246), recommendations 1.9.14 and 1.9.15. National Institute for Health and Care Excellence. nice.org.uk
  9. Waist-to-height ratio is a better screening tool than waist circumference and BMI for adult cardiometabolic risk factors: systematic review and meta-analysis. Ashwell M, Gunn P, Gibson S. Obesity Reviews 13(3):275-286 (2012)
Manish Kumar
Manish Kumar

Certified Personal Trainer & Sports Nutritionist

NASM-CPTCertified Sports Nutritionist10+ Years Experience500+ Clients Coached

NASM-certified fitness and nutrition coach with over 10 years of hands-on experience helping people build strength, lose fat, and live healthier lives. Specializing in gym-based workouts with a strong focus on lifting technique, biomechanics, and practical exercise science. Through FitLifeRegime, sharing the tools, tips, and insights that have worked for hundreds of clients — helping you start your own fitness journey with confidence and clarity.

Learn more about Manish
NASM Certified Personal Trainer Certificate

NASM Certified

Certified Personal Trainer & Sports Nutritionist from the National Academy of Sports Medicine

Disclaimer: This tool is for informational and personal journaling purposes only. Results are estimates based on published formulas and may vary based on individual factors such as genetics, training history, and measurement technique.