Key Takeaways
- Session RPE is a single number for how hard the whole ride felt, on a 0 to 10 scale. The scale only has words at 0 to 5, 7 and 10[2]. The calculator shows those words and doesn't invent labels for the gaps.
- Session load is RPE × minutes, in arbitrary units[1]. A 45-minute ride at RPE 7 scores 315, and a 90-minute ride at RPE 3 scores 270.
- Session load is never turned into watts or heart rate. The only published RPE-to-power guide is Andrew Coggan's table of seven power levels[3]. It is the author's guideline rather than a tested conversion, so it sits in its own tab, shown as printed, and isn't mixed with session load.
- In cycling studies, session RPE tracked a heart-rate-based score[1], gave similar values whenever it was asked between 5 minutes and 24 hours after the ride[4], and broadly matched coaches' plans in trained riders[5]. Riders rated sessions their coaches planned as easy as harder than planned[5].
- The same average power can feel very different. Interval structure changes the rating[4][7], and in professional riders RPE per watt rose over two Grand Tours[6].
How to Rate a Ride
Session RPE uses the modified CR-10 scale from Foster and colleagues[1]. It runs from 0 (rest) to 10 (maximal). Foster only put words on some of the numbers, and the rest are left blank on purpose[2]:
| RPE | Word on the scale |
|---|---|
| 0 | Rest |
| 1 | Very, very easy |
| 2 | Easy |
| 3 | Moderate |
| 4 | Somewhat hard |
| 5 | Hard |
| 6 | No word on the scale |
| 7 | Very hard |
| 8 | No word on the scale |
| 9 | No word on the scale |
| 10 | Maximal |
When you enter a number without a word, like 6 or 8, the calculator tells you which two words it sits between. Half points such as 4.5 are fine too.
- Rate the whole ride. The method asks "How was your workout?" and the single number stands for the average intensity of the session, not the hardest climb or sprint[2].
- Get used to the scale first. The review's description of the method says athletes should be familiarised with the scale before their ratings are used[2]. No source says how long that takes, so rate every ride for a few weeks and see whether your numbers settle.
- Rate at about the same time after each ride. In 15 well-trained riders doing 30-minute lab rides, ratings gave no significant difference whether they were taken between 5 minutes and 24 hours later. The authors note that having a cool-down or not may matter[4]. It is still easiest to pick one moment and keep it.
- Easy rides tend to get rated harder than planned. In 14 male road and mountain bike riders, sessions their coaches planned as easy were rated harder by the riders (3.0 against 2.0 in the paper's summary)[5]. If a gentle spin feels like a 3 to you, that is your number.
How the Load Is Calculated
Session load is your RPE multiplied by the length of the ride in minutes. The result is in arbitrary units (AU).
Foster's method is exactly this multiplication[1]. A published worked example is 87 minutes at RPE 4, which gives 348 AU[2].
That is why a hard, shorter ride can outscore a longer, easier one. 45 minutes at RPE 7 is 315 AU, against 270 AU for 90 minutes at RPE 3.
In week mode the tool does the same sum for each ride and adds them up. Here is a sample week, not a training plan:
| Day | RPE | Minutes | Load (AU) |
|---|---|---|---|
| Monday | 3 | 60 | 180 |
| Tuesday | Rest | – | – |
| Wednesday | 7 | 45 | 315 |
| Thursday | Rest | – | – |
| Friday | 2 | 45 | 90 |
| Saturday | Rest | – | – |
| Sunday | 4 | 150 | 600 |
Reading the week
- There are no "high" or "low" cut-offs here. No verified weekly target exists for cyclists, so the tool doesn't label your load. Compare your own weeks with each other.
- Foster's paper compared session RPE with a heart-rate method in steady and interval cycling. The two moved together consistently, but the RPE-based scores were higher in absolute terms[1]. So don't mix session-RPE units with heart-rate or power-based scores such as TSS. For the power-based side, see the Cycling NP, IF and TSS Calculator.
- For monotony and strain across a week, use the RPE Load Calculator.
Coggan's Power Levels and RPE
Andrew Coggan's chapter on training with a power meter (revised March 2003) sets out seven levels, each defined by average power as a percentage of threshold power[3]. It also lists a perceived exertion range for each level.
This is the one published RPE-to-power guide traced to a source, so the Power levels tab reproduces it. Here is Table 1 with the columns that matter here:
| Level | Name | Power (% of threshold) | Heart rate (% of threshold) | Perceived exertion |
|---|---|---|---|---|
| 1 | Active recovery | Under 55% | Under 68% | Under 2 |
| 2 | Endurance | 56 to 75% | 69 to 83% | 2 to 3 |
| 3 | Tempo | 76 to 90% | 84 to 94% | 3 to 4 |
| 4 | Lactate threshold | 91 to 105% | 95 to 105% | 4 to 5 |
| 5 | VO2max | 106 to 120% | Over 106% | 6 to 7 |
| 6 | Anaerobic capacity | Over 121% | Not given | Over 7 |
| 7 | Neuromuscular power | Not given | Not given | Maximal |
Example: with a threshold power of 250 W, an RPE of 4 appears under levels 3 and 4. Those levels span 190 to 263 W, which is the percentages above multiplied by 250 and rounded.
How far to trust this table
- It is a guideline, not a test result. The chapter gives no data behind the perceived exertion column, and no study tests it. Treat it as the author's starting point.
- Threshold power has a specific meaning. The chapter estimates it as average power in a time trial of about 40 km (50 to 70 minutes), and notes that 60-minute power is slightly higher than the power at lactate threshold (defined there as a 1 mmol/L rise in blood lactate)[3]. It gives one example correction for a shorter test: 20 km time trial power multiplied by 0.93. It doesn't cover other ways of estimating FTP, so a number from a different test may not line up with these percentages.
- The ratings are for early in the effort. Coggan says the values refer to effort felt early in a session or interval, because perceived exertion rises over time even at a constant power[3]. Session RPE is a rating of the whole ride, so don't feed the same number into both.
- The wording differs. Coggan reproduces Borg's original CR-10 words, such as "somewhat strong" for 4. Foster changed some of those words (strong became hard, for example) and kept the 0 to 10 numbers[2]. Treating the numbers as comparable is an assumption, and no source tests it.
- Average power can mislead. The chapter warns that coasting on hilly rides, or riding in a group, means the same average power doesn't carry the same stress as a flat solo effort[3]. It also calls translating the power levels into heart rate ranges "somewhat difficult" because of individual differences, and its heart rate column is a percentage of threshold heart rate, not of maximum.
- The bands have small gaps. Level 1 stops at 55% and level 2 starts at 56%, and so on. A value in a gap belongs to neither listed band, and the tool doesn't round it.
- Other sites show it differently. Some articles and apps print level 6 as 121 to 150% and level 7 as over 150%. The 2003 chapter gives level 6 as over 121% and level 7 no power figure[3], and that is what the tool uses. Only this version is checked, so later editions may differ.
What the Research Says, and What It Doesn't
Here is what each source studied, so you can judge how far to trust a cycling RPE number:
| Source | What it found | Limit |
|---|---|---|
| Foster et al., 2001[1] | In steady and interval cycling, session RPE moved consistently with a heart-rate-based score, though RPE scores were higher in absolute terms. | The abstract doesn't give the sample size. Different subjects did the basketball part. |
| Haddad et al., 2017[2] | A review of 36 validation studies of the modified CR-10 confirmed validity and good reliability across sports, ages and levels. It says the method can stand alone, though some recommend adding heart rate. | A review across sports, not a cycling trial. It also lists many things that shift RPE. |
| Coggan, 2003[3] | Seven power levels with power, heart rate and perceived exertion guidelines. | A guideline chapter, not a study. The perceived exertion column isn't backed by data in the chapter. |
| Christen et al., 2016[4] | Ratings taken from 5 minutes to 24 hours after 30-minute steady and interval rides showed no significant difference. Ratings rose with interval length, from 3.7 for the steady ride to 6.2 for 3-minute intervals. | 15 well-trained riders in lab rides. Ratings used a visual analogue scale rather than the word-labelled scale. |
| Inoue et al., 2022[5] | Coach-planned and rider-rated session RPE agreed closely overall (r = 0.87 for session RPE). Sessions planned as easy were rated harder by riders. | 14 male road and mountain bike riders and 5 coaches. |
| Sanders et al., 2018[6] | In two Grand Tours, RPE relative to power and session RPE relative to TSS rose by moderate to large amounts against baseline training. The authors say rising ratios could reflect progressive fatigue. | 12 professional cyclists, observational. It doesn't show that a rise in your own ratio means you are fatigued. |
| Seiler and Sylta, 2017[7] | All sessions were prescribed as maximal effort, yet RPE rose as work time fell. On the 6 to 20 scale, 61% of 4 × 4 minute sessions reached RPE 19 to 20, against 8% of 4 × 16 minute sessions. | 63 well-trained male cyclists. On the 6 to 20 scale, not the 0 to 10 one. |
| Scherr et al., 2013[8] | In 2,560 people tested on treadmills or cycle ergometers, Borg 6 to 20 ratings tracked heart rate (r = 0.74) and blood lactate (r = 0.83). The average lactate threshold sat at RPE 10.8. | Incremental lab tests on the 6 to 20 scale. Its numbers can't be read as 0 to 10 values. |
| Torres et al., 2025[9] | A scoping review of 234 studies found RPE is used widely but applied in varying ways across settings, and it calls for standardised guidelines. | It maps evidence. It doesn't set cycling targets. |
- The same power, a different feel. In Christen's study the steady ride was at 90% of ventilatory threshold, and the interval rides alternated equal work and rest with the hard parts at 75% of peak power[4]. Average ratings were 3.7 for the steady ride and 6.2 for the 3-minute intervals. Seiler and Sylta saw the same pattern in high-intensity sessions: the shorter the accumulated work, the higher the RPE, even when every session was prescribed as maximal[7]. So an RPE only means something next to the kind of ride it came from.
- RPE against power over time. If you record both, the ratio of RPE to power, or session RPE to TSS, may rise as fatigue builds. That came out of professional riders across Grand Tours[6]. It is an observation in elite riders, not a rule, and heat, sleep and other things also change RPE[2].
- Things that change your number. The Haddad review lists music, instructions, environmental temperature, altitude, caffeine, fitness level and more as influences on RPE[2]. A hot-day ride can score higher than the same ride in the cool, and that is part of what RPE captures.
- A different scale. Scherr and colleagues suggest 11 to 13 on the 6 to 20 scale for less trained people and 13 to 15 for harder aerobic work[8]. Those numbers must not be read as 0 to 10 values.
Using It in Practice
- Pick one moment to rate each ride, such as right after you stop, and stick with it[4].
- Rate the whole ride, then enter your RPE and minutes.
- Keep a log of your own numbers. Over a few weeks you will see what your usual easy ride and your usual hard ride score.
- If you have a power meter, log it next to the RPE. Power is the external load and RPE is how it felt to you. The ratio between them is what Sanders' team tracked[6].
For power-based load, try the Cycling NP, IF and TSS Calculator. To see what a given power means for finish time, use the Cycling Race Predictor, and for pace planning the Bike Pace Calculator. If you also run, there is a Running RPE Calculator.
Frequently Asked Questions
Sources & References
- A new approach to monitoring exercise training. Foster C, Florhaug JA, Franklin J, Gottschall L, Hrovatin LA, Parker S, Doleshal P, Dodge C. Journal of Strength and Conditioning Research 15(1):109-115 (2001)
- Session-RPE method for training load monitoring: validity, ecological usefulness, and influencing factors. Haddad M, Stylianides G, Djaoui L, Dellal A, Chamari K. Frontiers in Neuroscience 11:612 (2017)
- Training and racing using a power meter: an introduction (revised 25 March 2003). Coggan AR. Chapter; copy hosted at ipmultisport.com. The file doesn't state a publisher or peer-review status (2003)
- Temporal robustness of the session rating of perceived exertion. Christen J, Foster C, Porcari JP, Mikat RP. International Journal of Sports Physiology and Performance 11(8):1088-1093 (2016)
- Comparison of coach-athlete perceptions on internal and external training loads in trained cyclists. Inoue A, do Carmo EC, de Souza Terra B, Moraes BR, Lattari E, Borin JP. European Journal of Sport Science 22(8):1261-1267 (2022)
- Analysing a cycling grand tour: can we monitor fatigue with intensity or load ratios?. Sanders D, Heijboer M, Hesselink MKC, Myers T, Akubat I. Journal of Sports Sciences 36(12):1385-1391 (2018)
- How does interval-training prescription affect physiological and perceptual responses?. Seiler S, Sylta Ø. International Journal of Sports Physiology and Performance 12(Suppl 2):S280-S286 (2017)
- Associations between Borg's rating of perceived exertion and physiological measures of exercise intensity. Scherr J, Wolfarth B, Christle JW, Pressler A, Wagenpfeil S, Halle M. European Journal of Applied Physiology 113(1):147-155 (2013)
- Rating of perceived exertion in continuous sports: a scoping review with evidence gap map. Torres G, Maia F, Nakamura FY, Neiva HP, Sousa A. Frontiers in Sports and Active Living 7:1553998 (2025)

Certified Personal Trainer & Sports Nutritionist
NASM-certified fitness and nutrition coach with over 10 years of hands-on experience helping people build strength, lose fat, and live healthier lives. Specializing in gym-based workouts with a strong focus on lifting technique, biomechanics, and practical exercise science. Through FitLifeRegime, sharing the tools, tips, and insights that have worked for hundreds of clients — helping you start your own fitness journey with confidence and clarity.
Learn more about Manish
NASM Certified
Certified Personal Trainer & Sports Nutritionist from the National Academy of Sports Medicine
Disclaimer: This tool is for informational and personal journaling purposes only. Results are estimates based on published formulas and may vary based on individual factors such as genetics, training history, and measurement technique.