Key Takeaways
- The dynamic strength index is your jump peak force divided by your isometric peak force, usually from a countermovement jump and an isometric mid-thigh pull on a force plate[2][3]. Below 0.60, between 0.60 and 0.80, and above 0.80 are read as a ballistic, concurrent and maximal strength emphasis[2].
- Those cut-offs are suggestions from a small 2011 study, not validated thresholds[1]. A 2024 critique calls them highly disputable[6], and in a 2025 study of 37 athletes the training recommendation changed for many when the ratio was calculated a different way[7].
- Isometric force does most of the work. In 155 college athletes it explained about 72% of the variation in DSI for men and 56% for women, against 9% and 10% for jump force[2]. A high ratio can simply mean a low isometric number.
- Average values depend heavily on who was tested and how. College athletes averaged 0.47 and 0.51[2], while team-sport groups in another study ranged from 0.70 to 0.91[5]. Do not chase a number. Use the same tests every time and watch both forces, not only the ratio.
What the Dynamic Strength Index Is
The dynamic strength index compares how much force you produce in a fast jump with the most force you can produce in a static pull. The original 2011 paper called it the dynamic strength deficit[1]. The idea is simple.
If a jump only reaches a small share of your isometric peak force, the thinking goes that your strength is not being used quickly. If it reaches a large share, the thinking goes that your strength ceiling is the limit[2].
The jump is called the ballistic test, and the static pull is the isometric test. The most common pairing is the countermovement jump and the isometric mid-thigh pull, mostly because both are very reliable[9].
This calculator does the division, shows where the ratio falls against the common cut-offs, and can place your numbers against published college athlete data. It cannot tell you what to train. That decision needs your sport, your training history and your other tests.
The Formula
| Name | Formula |
|---|---|
| Dynamic strength index | DSI = ballistic peak force (N) ÷ isometric peak force (N) |
The result is a ratio with no unit. Dividing both forces by body weight does not change it, so body weight only matters for the per-kilogram comparison in the calculator.
Worked example: 1,900 N and 3,800 N
1,900 ÷ 3,800 = 0.50. That is in the ballistic emphasis suggested range (Below 0.60).
At 80 kg those forces are 23.75 N/kg for the jump and 47.50 N/kg for the pull. Whether 0.50 is a problem depends on those two numbers and on the sport, not on the 0.50 alone.
Use the force exactly as your plate software reports it, with body weight included, because that is what the studies on this page did. One paper points out that the force above body weight (net force) may suit ballistic tasks better and suggests testing DSI that way[2].
No standard exists for it, so this calculator does not use it.
How to Test: Jump and Pull
The ratio is only as good as the two tests behind it. These steps follow the protocols in the studies cited here.
- Use a force plate. Every study behind the bands used one. No validated way exists to estimate either force from jump height, a 1RM or bar speed, so do not enter estimates.
- Warm up, then ramp up. The studies used a general warm-up and two submaximal efforts, at about 50% and 75% of perceived effort, before the maximal attempts[2][3][5].
- Jump first, pull second. The studies tested the jump first and rested for roughly 5 minutes before the pull[2][3][5].
- Countermovement jump. Hands on the hips (or a light pipe on the upper back), jump as high and as fast as possible, to a depth you choose, with about a minute between trials. Take the peak force from the propulsion phase, not the braking phase[3][5].
- Isometric mid-thigh pull. The bar sits at mid-thigh, just below the crease of the hip, with joint angles in the ranges the studies used (roughly 125 to 150 degrees at the knee and 140 to 160 at the hip)[2][3][5]. Pull as fast and as hard as you can for about 5 seconds, pushing the feet into the plate, with 2 minutes between pulls. In one study a trial was repeated if two peak forces were more than 250 N apart[3].
- Repeat the same set-up every time. Isometric peak force changes with body position and with how practised you are[2]. Keep the bar height and joint angles the same from session to session.
- Pick one way to combine trials and keep it. Some studies averaged all three trials, and another used the mean of the best two, so there is no single rule[3][4][5].
A few choices change the number, so keep them fixed.
A countermovement jump gave a more repeatable DSI than a squat jump in 27 young male players (variation of 3.8 to 4.6% against up to 15.9% on the first day for the squat jump), although the average ratios were similar[3].
An isometric squat gives higher peak forces than the mid-thigh pull, so the two are not interchangeable[6].
And single-leg values come out lower: in 16 people the bilateral DSI was about 0.72 against about 0.52 for the dominant leg, so the same bands would point the same person to different training. Do not apply them to single-leg tests.
That study used net force (body weight removed), so its numbers are not directly comparable with the gross-force values used elsewhere on this page[10].
That 3.8 to 4.6% variation means a ratio near 0.50 could move by about 0.02 from trial to trial with no real change, by calculation. For other jump and strength tests, see the Vertical Jump Calculator, One Rep Max Calculator and Two Rep Max Calculator.
Reading Your Ratio
| DSI | Emphasis suggested | The idea behind it |
|---|---|---|
| Below 0.60 | Ballistic | The jump reaches under 60% of isometric peak force |
| 0.60 to 0.80 | Concurrent | Maximal strength and ballistic work together |
| Above 0.80 | Maximal strength | The jump already uses most of the isometric force, so raise the ceiling |
Training guidance from the 2011 study, restated in later papers (sources 1 and 2). Suggestions, not prescriptions.
The 2011 authors tied the cut-offs to the isometric number. A low ratio together with a high isometric peak force suggested more ballistic work. A very high ratio together with a low isometric peak force suggested more maximal strength work, in both cases alongside other coaching observations[1].
Later papers sometimes write the cut-offs as 0.60 or below and 0.80 or above[2]. The calculator uses below 0.60, 0.60 to 0.80 inclusive, and above 0.80, applied to the two-decimal ratio it shows you.
Why not to lean on the band alone:
- The ratio hides the two forces. Two female volleyball players scored 0.46 and 0.45. One sat at about the 90th percentile for isometric force per kilogram, the other at about the 50th, and their jump force per kilogram was at about the 90th and the 10th[2]. The same ratio, very different athletes.
- Jump strategy changes jump peak force. A 2024 critique argues that countermovement depth and similar choices shape the force, so general cut-offs do not transfer well. It suggests load-velocity profiling as a simpler way to decide between force and velocity work[6].
- How you calculate it changes the advice. In 37 team-sport athletes, a ratio built from impulse instead of peak force gave the same training recommendation as the peak force ratio for only about half of them, depending on the version. The paper reports 44.7% and 55.3% in its abstract and 45.9% and 56.8% in its results, so treat it as roughly half[7].
- The evidence for practical use is thin. A 2026 review found most research uses the bilateral jump and pull, and that other DSI calculations have limited evidence behind them[9].
What Values Have Been Reported
Published averages show how wide the range is. They are not targets.
| Group | n | Tests | DSI | Source |
|---|---|---|---|---|
| NCAA Division I men | 88 | CMJ, IMTP | 0.47 ± 0.08 | [2] |
| NCAA Division I women | 67 | CMJ, IMTP | 0.51 ± 0.08 | [2] |
| Male soccer players | 16 | CMJ, IMTP | 0.70 ± 0.16 | [5] |
| Female soccer players | 15 | CMJ, IMTP | 0.80 ± 0.23 | [5] |
| Male basketball players | 17 | CMJ, IMTP | 0.86 ± 0.13 | [5] |
| Male cricketers | 23 | CMJ, IMTP | 0.86 ± 0.21 | [5] |
| Female netball players | 21 | CMJ, IMTP | 0.89 ± 0.22 | [5] |
| Female cricketers | 23 | CMJ, IMTP | 0.91 ± 0.13 | [5] |
| Male youth soccer and rugby league, aged about 17 | 27 | CMJ, IMTP | 0.84 ± 0.15 | [3] |
| Same youth players | 27 | Squat jump, IMTP | 0.82 ± 0.18 | [3] |
| Mixed team-sport athletes, aged about 22 | 37 | CMJ, IMTP | 0.82 ± 0.12 | [7] |
Mean ± standard deviation. The studies differ in sex, age, sport and how peak force was defined, so they are not one scale.
Both college averages are under 0.60, while every team-sport group in the other study was at 0.70 or above[2][5]. How much of that gap is the athletes and how much is differences in how each lab tested is not known.
No reference values exist for recreational lifters, so the comparison below uses a college group.
The calculator's comparison uses the percentile points published for the college group. Here they are for men and women, with the jump and pull shown per kilogram of body weight[2].
| Measure | Group | Mean | 10th | 30th | 50th | 70th | 90th |
|---|---|---|---|---|---|---|---|
| DSI | Men (n = 88) | 0.47 | 0.38 | 0.43 | 0.46 | 0.51 | 0.57 |
| DSI | Women (n = 67) | 0.51 | 0.43 | 0.45 | 0.49 | 0.55 | 0.62 |
| Jump force, N/kg | Men (n = 88) | 24.0 | 21.5 | 22.5 | 24.2 | 24.9 | 26.8 |
| Jump force, N/kg | Women (n = 67) | 22.4 | 19.9 | 20.8 | 22.4 | 23.8 | 24.6 |
| Isometric force, N/kg | Men (n = 88) | 52.1 | 42.0 | 47.4 | 50.8 | 56.6 | 63.8 |
| Isometric force, N/kg | Women (n = 67) | 45.2 | 35.8 | 41.7 | 44.9 | 48.4 | 53.4 |
NCAA Division I athletes, aged 18 to 23, tested in pre-season (source 2). Percentile points as published.
What Happens When You Train
The ratio moves because one of the two forces moves. In 24 college athletes (14 men, 10 women) who did four weeks of in-season strength training twice a week, the eight with the highest ratios (average 0.85, range 0.80 to 0.92) dropped to about 0.74.
Their isometric peak force rose by roughly 16% and their jump peak force did not change. The eight with the lowest ratios (average 0.56) showed no meaningful change[4]. I am quoting the group figures only, because the paper's overall before and after numbers read the wrong way round.
So a falling ratio after a strength block can be a good sign, not a loss of explosiveness. The 2011 authors made the same point: if both forces rise and the ratio stays put, that is still progress[1].
The 2018 authors also noted that four weeks was not enough to bring the high-ratio group below 0.60[4].
One trial has used the ratio to assign training. In 43 elite basketball players over five weeks, the group on a DSI-guided plan improved its 5 m sprint and 505 change-of-direction times, while the group on a standard plan got slower over 5 to 20 m.
Within the DSI-guided group, the significant gains were in the players sent to strength work[8]. The researchers did not use the usual cut-offs.
They split the players at 0.90, close to the group mean of 0.89 and to the 0.86 to 0.90 averages reported for basketball players earlier, and they said that benchmark may have been set too high[8].
It was one sport with a similar group of players, and the plan was individualised as well as DSI-based, so it does not show that the ratio itself works as a general diagnostic.
One more caution from the 2024 critique: it notes that the 2011 authors themselves said athletes with low relative strength would probably gain most from building it, whatever their ratio[6].
Limits to Keep in Mind
- The cut-offs come from a small study and later papers repeat them. They are not validated thresholds[1][6].
- Every reference sample here is athletes, mostly young, tested with a jump and a mid-thigh pull. Do not read the tables as norms for the general population.
- Values from different protocols do not line up. Squat jump against countermovement jump, mid-thigh pull against isometric squat, one leg against two, and gross against net force all change the number[3][6][10].
- The percentile bands are read from nine published points, so they are bands, not exact percentiles.
- This is a training reference, not a medical or injury-risk tool.
Frequently Asked Questions
Sources & References
- An evaluation of a strength qualities assessment method for the lower body (the source of the 0.60 and 0.80 suggestions; calls the ratio the dynamic strength deficit). Sheppard JM, Chapman D, Taylor K-L. Journal of Australian Strength and Conditioning 19(2):4-10 (2011)
- Dynamic Strength Index: Relationships with Common Performance Variables and Contextualization of Training Recommendations. Suchomel TJ, Sole CJ, Bellon CR, Stone MH. Journal of Human Kinetics 74(1):59-70 (2020)
- Comparison of Methods of Calculating Dynamic Strength Index. Comfort P, Thomas C, Dos'Santos T, Jones PA, Suchomel TJ, McMahon JJ. International Journal of Sports Physiology and Performance 13(3):320-325 (2018)
- Changes in Dynamic Strength Index in Response to Strength Training. Comfort P, Thomas C, Dos'Santos T, Suchomel TJ, Jones PA, McMahon JJ. Sports 6(4):176 (2018)
- A Comparison of Dynamic Strength Index between Team-Sport Athletes. Thomas C, Dos'Santos T, Jones PA. Sports 5(3):71 (2017)
- The Dynamic Strength Index: is this a useful tool when making programming decisions? (critique). Brearley S, Buckthorpe M, Xu J, Bishop C. UKSCA Journal, issue 71 (Summer 2024) (2024)
- Comparisons between different methods of calculating dynamic strength index: Effect on training recommendations. Ripley NJ, Fahey J, Guppy S, Comfort P. PLOS ONE 20(9):e0331519 (2025)
- Effectiveness of an Individualized Training Based on Dynamic Strength Index on Sprinting, Jumping and Change of Direction Performance in Basketball Players: A Randomized Controlled Trial. Pleša J, Ujaković F, Ribič A, Bishop C, Šarabon N, Kozinc Ž. Journal of Sports Science and Medicine 23(3):504-514 (2024)
- Narrative Review of the Dynamic Strength Index: Measures, Normative Mean Values, and Links to Common Sport Performance Metrics (abstract only). Tan KJZ, Lee MJC, Storey AG. Strength and Conditioning Journal 48(2):201-212 (2026)
- The dynamic strength index is higher in bilateral compared to unilateral testing. Svane S, Spedsbjerg F, Thusholt M, Sørensen M, Madsen S, Iversen A, Kristiansen M. Science & Sports 40(4):309-318 (2025)

Certified Personal Trainer & Sports Nutritionist
NASM-certified fitness and nutrition coach with over 10 years of hands-on experience helping people build strength, lose fat, and live healthier lives. Specializing in gym-based workouts with a strong focus on lifting technique, biomechanics, and practical exercise science. Through FitLifeRegime, sharing the tools, tips, and insights that have worked for hundreds of clients — helping you start your own fitness journey with confidence and clarity.
Learn more about Manish
NASM Certified
Certified Personal Trainer & Sports Nutritionist from the National Academy of Sports Medicine
Disclaimer: This tool is a training reference only. Ranges come from published guidelines and research on groups of people, and your needs may differ. It is not medical advice. Check with a qualified professional before changing your training.